# Best work boots for electricians: EH-rated, non-metallic toe picks Source: https://toecapandlace.com/best/best-work-boots-for-electricians Publisher: Toecap & Lace. Picks are chosen from what each Amazon listing states, not from hands-on tests. Method: https://toecapandlace.com/how-we-pick An electrician's boot has one job most work boots do not: it should be rated for electrical hazard (EH) protection, which the listings describe as a secondary source of protection against live circuits through the sole and heel. EH is not a license to work hot. It is a backup. The second question is the toe. A composite or other non-metallic toe keeps metal out of the boot, and several listings here note it does not transmit heat or cold. This guide only includes boots whose listing states an EH rating, and it notes which ASTM standard each listing cites, because the label on the tongue is what an inspector or safety manager will check. We compare toe material, the stated rating, waterproofing and shaft height, then rank by how well each boot fits a day of panel work, crawlspaces and job site walking. ## Picks ### 1. Danner Vicious 8" Composite Toe Work Boots for Men - 10.5 Wide Safety toe: Composite (non-metallic); EH rating per listing: ASTM F2413-18 I/75 C/75 EH; Waterproof: Yes, GORE-TEX lining; Height: 8 inch An 8-inch composite toe boot with a GORE-TEX lining and a Vibram outsole. The listing states ASTM F2413-18 M I/75 C/75 EH and non-conductive soles and heels. This variant is a wide size. What the listing offers: - The listing spells out the full rating, ASTM F2413-18 M I/75 C/75 EH, which is exactly what a safety manager wants to see. - Non-metallic toe that, per the listing, does not transmit heat or cold and will not set off metal detectors. - GORE-TEX lining plus a lugged, oil-resistant Vibram outsole with a 90-degree heel for ladders and wet sites. Limits to know: - At $269.95 it is one of the pricier picks here, and the 8-inch shaft is more boot than some indoor electricians need. - The listing does not state the boot weight, so you cannot compare it on paper with lighter hiker-style options. ### 2. KEEN Utility Men's Cincinnati 8" Waterproof Composite Toe Wedge Work Boots, Black/Sandshell, 12 EE Safety toe: Carbon composite (non-metallic); EH rating per listing: ASTM F2412 and F2413 EH; Waterproof: Yes, KEEN.DRY membrane; Height: 8 inch An 8-inch wedge boot with asymmetrical carbon safety toes that the listing says are 15% lighter than steel. It is EH-rated and waterproof. A good fit for electricians who spend the day on slab and finished floors. What the listing offers: - Non-metallic carbon toes, which the listing says meet ASTM F2412 and F2413 EH standards. - Non-marking, siped wedge outsole that meets ASTM F1677-96 and F2913 SATRA slip standards per the listing. - Luftcell PU midsole and a removable dual-density insole for long days standing at panels. Limits to know: - A wedge sole has no defined heel, so it is a weaker choice for climbing ladders or working on rough ground. - The listing does not give impact and compression class numbers (such as I/75 C/75) for this version. ### 3. Irish Setter Wingshooter ST 6" Mens NMT Toe Work Boot, Brown, 10 Safety toe: Non-metallic; EH rating per listing: ASTM F2413-18 M/I/C, EH; Waterproof: Yes, UltraDry; Height: 6 inch A 6-inch leather boot with a non-metallic safety toe and a Goodyear welt that can be resoled. The listing cites ASTM F2413-18 M/I/C EH and ASTM F3445-21 SR slip resistance. What the listing offers: - The listing cites both ASTM F2413-18 M/I/C EH and ASTM F3445-21 SR, so toe, EH and slip ratings are all on paper. - Goodyear welt on a rubber-EVA Traction Tred sole, which the listing says can be resoled to extend its life. - UltraDry waterproof construction and a removable polyurethane footbed. Limits to know: - The listing mentions a steel shank, so the boot is not fully metal-free even though the toe is non-metallic. - Boot weight is not stated, and the 6-inch shaft gives less ankle coverage than the 8-inch picks. ### 4. Timberland PRO Men's Boondock 6 Inch Composite Safety Toe Waterproof Industrial Work Boot, Brown, 10.5 Wide Safety toe: Composite (non-metallic); EH rating per listing: ASTM F2412-18a, F2413-18, F2892-18; Waterproof: Yes, membrane (ASTM F1671-07); Height: 6 inch A 6-inch industrial boot with a lightweight, non-metallic composite toe, a waterproof membrane and an all-weather TPU outsole. This listing is a wide size, useful for electricians who need extra room. What the listing offers: - The listing names ASTM F2412-18a, F2413-18 and F2892-18 for electrical hazard protection. - Composite toe meets ASTM F2413-18 I and C impact and compression standards per the listing. - Anti-Fatigue Technology footbed aimed at long standing shifts, plus a TPU outsole for wet and frosty surfaces. Limits to know: - The listing does not give the impact and compression class numbers, only that it meets the I and C standards. - The TPU outsole is described for traction, but the listing gives no slip test standard to compare with other boots. ### 5. Thorogood American Heritage 8” Waterproof Composite Toe Work Boots for Men Made from Premium Leather with Slip-Resistant Wedge Outsole and Comfort Insole; EH Rated - 9 D(M) US Safety toe: Composite; EH rating per listing: ASTM F2413-18 EH; Waterproof: Yes, gusseted tongue; Height: 8 inch An 8-inch waterproof moc-style boot with a composite safety toe, MAXWear wedge outsole and Goodyear storm welt. The listing states ASTM F2413-18 for both the safety toe and EH resistance. What the listing offers: - The listing states ASTM F2413-18 for both the composite safety toe and electrical hazard resistance. - Fiberglass shank keeps the underfoot structure non-metallic, along with the composite toe. - Goodyear storm welt, which the listing describes as fully serviceable, plus a removable Poron cushion insole. Limits to know: - At $304.95 it is the most expensive pick here. - Wedge outsole gives less heel bite on ladder rungs than a heeled boot like the Danner Vicious. ### 6. Carolina 28 Series 8" Composite Toe Waterproof Work Boots, Brown - 10 D Height: 8 in.; Safety toe: Composite; Shank: Not stated; EH: Yes, stated; Outsole: Rubber lug, non-conductive; Waterproof: Yes, Scubaliner An 8 in. waterproof logger style boot with a composite toe, EH rating, removable kiltie and AG7 footbed. Suits wet weather crews that need a non-metallic toe. What the listing offers: - Composite safety toe and EH rating with a non-conductive rubber lug outsole. - Fully waterproof with the Scubaliner, per the listing. - Removable kiltie keeps grit out of the laces, and the AG7 footbed is removable. Limits to know: - No shank or heel details are listed, both important for gaff work. - The listing gives no ASTM standard numbers. As an Amazon Associate I earn from qualifying purchases.